Cisco CSACS-1121-K9 Reference Guide - Page 133
debug-log, level, debug, error, fatal
View all Cisco CSACS-1121-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Appendix A ACS Command Reference ACS Configuration Commands • runtime • runtime-idstores Examples acs/admin(config-acs)# debug-adclient enable acs/admin(config-acs)# Related Commands Command no debug-adclient debug-log show debug-log show debug-adclient show acs-logs Description Disables debug logging for an Active Directory client. Defines the local debug logging level for the ACS components. Shows the debug log level status for subsystems (enabled or disabled). Shows the debug log level status for an Active Directory client (enabled or disabled). Displays ACS server debug logs. debug-log To set the local debug logging level for all or specific ACS components, use the debug-log command in the ACS Configuration mode. Any user, irrespective of role, can issue this command. debug-log {component | all} level {debug | info | warn | error | fatal | none} Syntax Description component all level Selects local debug logging on the components you want, where component can be any of the components described in the Usage Guidelines. Selects local debug logging on all components. Selects local debug logging level. The options are: • debug-Selects logging messages with the DEBUG severity level. • info-Selects logging messages with the INFO severity level. • warn-Selects logging messages with the WARN severity level. • error-elects logging messages with the ERROR severity level. • fatal-Selects logging messages with the FATAL severity level. • none-Selects logging messages with the no severity level. Defaults All ACS debug logging is set to warn. Command Modes ACS Configuration Usage Guidelines You can select any of the following options (including suboptions) as a component: OL-18996-01 CLI Reference Guide for the Cisco Secure Access Control System 5.1 A-95