Cisco CSACS-1121-K9 Reference Guide - Page 176
snmp-server contact, version
View all Cisco CSACS-1121-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Configuration Commands Appendix A ACS Command Reference Examples acs/admin(config)# snmp-server community new ro acs/admin(config)# Related Commands Command snmp-server host snmp-server location snmp-server contact Description Sends traps to a remote system. Configures the SNMP location MIB value on the system. Configures the SNMP contact MIB value on the system. snmp-server contact To configure the SNMP contact MIB value on the system, use the snmp-server contact command in Configuration mode. To remove the system contact information, use the no form of this command. snmp-server contact word Syntax Description word String that describes the system contact information of the node. Up to 255 alphanumeric characters. Defaults No default behavior or values. Command Modes Configuration Usage Guidelines None. Examples acs/admin(config)# snmp-server contact Luke acs/admin(config)# Related Commands Command snmp-server host snmp-server community snmp-server location Description Sends traps to a remote system. Sets up the community access string to permit access to the SNMP. Configures the SNMP location MIB value on the system. snmp-server host To send SNMP traps to a remote user, use the snmp-server host command in Configuration mode. To remove trap forwarding, use the no form of this command. snmp-server host {ip-address | hostname} version {1 | 2c} community A-138 CLI Reference Guide for the Cisco Secure Access Control System 5.1 OL-18996-01