Cisco IE-3000-4TC Installation Guide - Page 120
B-21, Pushing the DIN Rail Latches
UPC - 882658187797
View all Cisco IE-3000-4TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Installing the Switch Appendix B Installation In a Hazardous Environment Step 4 Push the DIN rail latches in after the switch is over the DIN rail. See Figure B-21. Figure B-21 Pushing the DIN Rail Latches In 201829 Note If you are using a 15-mm DIN rail, rotate all the feet (see Figure B-21) to the extended positions. Otherwise, rotate all the feet to the recessed positions. Figure B-22 shows the two DIN rails. You can use either the 7.5-mm or the 15-mm DIN rail. B-30 Cisco IE 3000 Switch Hardware Installation Guide OL-13017-01
B-30
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Appendix B
Installation In a Hazardous Environment
Installing the Switch
Step 4
Push the DIN rail latches in after the switch is over the DIN rail. See
Figure B-21
.
Figure B-21
Pushing the DIN Rail Latches In
Note
If you are using a 15-mm DIN rail, rotate all the feet (see
Figure B-21
) to the extended positions.
Otherwise, rotate all the feet to the recessed positions.
Figure B-22
shows the two DIN rails. You
can use either the 7.5-mm or the 15-mm DIN rail.
201829