Cisco IE-3000-4TC Installation Guide - Page 41
Crimping the Ring Terminal, Torquing Ground-Lug Screws, Step 4
UPC - 882658187797
View all Cisco IE-3000-4TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 2 Switch Installation Figure 2-10 Crimping the Ring Terminal Verifying Switch Operation 76666 Step 4 Step 5 Step 6 Slide the ground screw through the ring terminal. Insert the ground screw into the functional ground screw opening on the front panel. Use a ratcheting torque screwdriver to tighten the ground screw and ring terminal lug to the switch front panel to 8.5 in-lb. The torque should not exceed 8.5 in-lb. See Figure 2-11. Figure 2-11 Torquing Ground-Lug Screws 201696 1 1 Ground cable Step 7 Attach the other end of the ground wire to a grounded bare metal surface, such as a ground bus, a grounded DIN rail, or a grounded bare rack. OL-13017-01 Cisco IE 3000 Switch Hardware Installation Guide 2-15
2-15
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Chapter 2
Switch Installation
Verifying Switch Operation
Figure 2-10
Crimping the Ring Terminal
Step 4
Slide the ground screw through the ring terminal.
Step 5
Insert the ground screw into the functional ground screw opening on the front panel.
Step 6
Use a ratcheting torque screwdriver to tighten the ground screw and ring terminal lug to the switch front
panel to 8.5 in-lb. The torque should not exceed 8.5 in-lb. See
Figure 2-11
.
Figure 2-11
Torquing Ground-Lug Screws
Step 7
Attach the other end of the ground wire to a grounded bare metal surface, such as a ground bus, a
grounded DIN rail, or a grounded bare rack.
76666
1
Ground cable
1
201696