Cisco RV016 Administration Guide - Page 16

Introduction Getting Started with the Configuration 1 • RV016: Connect an Ethernet cable from the Internet 2 port to a second broadband network device. STEP 4 To connect a computer or server that will be a DMZ host: • RV042, RV042G, and RV082: Connect an Ethernet cable from the DMZ/ Internet port to the DMZ host. • RV016: Connect an Ethernet cable from the DMZ port to the DMZ host. STEP 5 To connect other network devices, such as computers, print servers, or Ethernet switches, connect an Ethernet cable from a numbered LAN port to the network device. STEP 6 Power on the broadband network device(s). STEP 7 Use the power adapter (RV042 and RV042G) or the power cable (RV082 and RV016) to connect the router to a power outlet. The System status light is green. STEP 8 Power on the other network devices. Getting Started with the Configuration STEP 1 Connect a computer to a numbered LAN port on the router. Your PC will become a DHCP client of the router and will receive an IP address in the 192.168.1.x range. STEP 2 Start a web browser. To use the configuration utility, you need a PC with Internet Explorer (version 6 and higher), Firefox, or Safari (for Mac). STEP 3 In the address bar, enter the default IP address of the router: 192.168.1.1 STEP 4 When the login page appears, enter the default user name admin and the default password admin (lowercase). STEP 5 Click Login. The System Summary page appears. The router's default settings are sufficient for many small businesses. Your Internet Service Provider may require additional settings. On the System Summary page, check the WAN Status to see if the router was able to receive an IP Address. If not, continue to the next step. Cisco Small Business RV0xx Series Routers Administration Guide 16