Cisco SGE2010 Administration Guide - Page 26
SSL Generate Certificate - ip
UPC - 745883581269
View all Cisco SGE2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Using the Console System Configuration SSL Generate Certificate Use the SSL Certificate Generation screen to view, edit, and execute device-generated certificates. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration menu, select 4. Security Settings. 3. From the Security Settings Menu, select 1. SSL Generate Certificate. To edit and execute a certificate: 1. Select Edit, and then make your changes. Press the Tab key to move the cursor from field to field. 2. Press the Esc key to move the cursor to the Action list. 3. Select Execute to generate the certificate with the new parameters. 4. When the Operation complete message appears, press the Esc key to move the cursor to the Action list. The following fields are specified: Public Key Algorithm Public Key Length Common Name (FQCN) Department Name Organization Name Locality or City Name State or Province Name Specifies the SSL type Specifies the SSL RSA key length. (Range: 512 to 2048) IP address of the Ethernet switch Specifies the department name. (Range: 1 to 32 characters) Specifies the organization name. (Range: 1 to 32 characters) Specifies the location or city name. (Range: 1 to 32 characters) Specifies the state or province name. (Range: 1 to 32 characters) SGE2010/SGE2010P Administration Guide 23