Cisco SGE2010 Administration Guide - Page 41

TraceRoute IPv4, System Configuration, Network Configuration, Execute, Switch Main Menu, Action - routing

Get Cisco SGE2010 - Small Business Managed Switch PDF manuals and user guides
UPC - 745883581269
View all Cisco SGE2010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Using the Console System Configuration TraceRoute IPv4 You can use the TraceRoute IPv4 screen to run a trace route test for an IPv4 address To open the screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 5. Network Configuration. 4. From the Network Configuration menu, select 3. Trace Router IPv4. To change the IP address: 1. Select Edit, and then enter the IPv4 address. 2. Press the Esc key to move the cursor to the Action list. To begin the trace route test: 1. Select Execute to begin the test. 2. After the test is complete, the results of the test appear on the screen. 3. When the Operation complete message appears, press the Esc key to move the cursor to the Action list. SGE2010/SGE2010P Administration Guide 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
SGE2010/SGE2010P Administration Guide
38
System Configuration
Using the Console
TraceRoute IPv4
You can use the
TraceRoute IPv4
screen to run a trace route test for an IPv4 address
To open the screen:
1.
From the
Switch Main Menu
, select
1. System Configuration
.
2.
From the
System Configuration
Menu
, select
6. IP Configuration
.
3.
From the
IP Configuration
menu, select
5. Network Configuration
.
4.
From the
Network Configuration
menu, select
3. Trace Router IPv4
.
To change the IP address:
1.
Select
Edit
, and then enter the IPv4 address.
2.
Press the
Esc
key to move the cursor to the
Action
list.
To begin the trace route test:
1.
Select
Execute
to begin the test.
2.
After the test is complete, the results of the test appear on the screen.
3.
When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.