Cisco SGE2010 Administration Guide - Page 54
Web Utility Configuration, Connecting to the Switch with the Web-Based Utility - sge2010p default ip address
UPC - 745883581269
View all Cisco SGE2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
5 Web Utility Configuration Connecting to the Switch with the Web-Based Utility Web Utility Configuration This chapter provides an introduction to the features of the web-based configuration utility. Linksys switch provides a complete web-based utility to configure the switch. This utility is accessed through your web browser. • "Connecting to the Switch with the Web-Based Utility ," on page 51 • "Using Menus in the Web-Based Utility," on page 51 • "Viewing On-line Help ," on page 52 Connecting to the Switch with the Web-Based Utility You can connect to the switch using a standard web browser on a computer that is connected to the same network as the switch. To access the web-based utility, enter the IP address of the switch to the address field of your web browser. The default IP address is 192.168.1.254. Using Menus in the Web-Based Utility Use the left navigation panel to choose options in the web-based utility. SGE2010/SGE2010P Administration Guide 51