Cisco SGE2010 Administration Guide - Page 35
ISATAP Interface Show, Space Bar, System Configuration, IPv6 Address Configuration - sge2010p save configuration
UPC - 745883581269
View all Cisco SGE2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Using the Console System Configuration To edit the ISATAP tunnel settings 1. Select Edit., and then make the changes. Press the Tab key to move the cursor from one field to the next. NOTE: To enable or disable the ISATAP tunnel, move the cursor to the Status field, and then press the Space Bar to toggle between ENABLE and DISABLE. 2. Press the Esc key to move the cursor to the Action list. 3. Select Save to save your settings 4. When the Operation complete message appears, press the Esc key to move the cursor to the Action list. IPv6 ISATAP Interface Show You can use the ISATAP Interface Show screen to view the interface type and address. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 2. IPv6 Address Configuration. 4. From the IPv6 Address Configuration menu, select 5. ISATAP Interface Show. SGE2010/SGE2010P Administration Guide 32