Cisco SGE2010 Administration Guide - Page 39
Ping IPv4, System Configuration, Network Configuration, IPv4 Ping, Execute, Switch Main Menu, Action
UPC - 745883581269
View all Cisco SGE2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Ping IPv4 You can use the Ping IPv4 screen to ping an IPv4 address. Using the Console System Configuration To open the screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 5. Network Configuration. 4. From the Network Configuration menu, select 1. IPv4 Ping. To change the IP address: 1. Select Edit, and then enter the IP address. 2. Press the Esc key to move the cursor to the Action list. 3. Select Save to save your changes. 4. When the Operation complete message appears, press the Esc key to move the cursor to the Action list. To begin the ping test: 1. Select Execute to begin the ping test. 2. After the ping test is complete, the results of the test appear on the screen. 3. When the Operation complete message appears, press the Esc key to move the cursor to the Action list. SGE2010/SGE2010P Administration Guide 36