Cisco SGE2010 Administration Guide - Page 36
IPv6 Default Gateway, System Configuration, IPv6 Address Configuration, Space Bar, Execute - default ip address
UPC - 745883581269
View all Cisco SGE2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Using the Console System Configuration IPv6 Default Gateway You can use the IPv6 Default Gateway screen to view or edit information about the IPv6 Default Gateway. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 2. IPv6 Address Configuration. 4. From the IPv6 Address Configuration menu, select 6. IPv6 Default Gateway. To edit the IPv6 default gateway settings: 1. Select Edit., and then make the changes. Press the Tab key to move the cursor from one field to the next. NOTE: To change the state of the gateway, move the cursor to the State field, and then press the Space Bar to toggle between ENABLE and DISABLE. 2. Press the Esc key to move the cursor to the Action list. 3. Select Execute to save your settings 4. When the Operation complete message appears, press the Esc key to move the cursor to the Action list. SGE2010/SGE2010P Administration Guide 33