Cisco SLM248G Administration Guide - Page 63
Spanning Tree, STP Port Settings, Enable
UPC - 745883580279
View all Cisco SLM248G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Spanning Tree STP Port Settings 7 To open the STP Port Settings window: STEP 1 Click Spanning Tree > STP Port Settings. The STP Port Settings window appears. STP Port Settings The STP Port Settings window contains the following fields: • Interface - Indicates the interface on which STP parameters are configured. The possible field values are: - Port - Indicates the port on which STP is configured. - LAG - Indicates the LAG on which STP is configured. • Enable STP - Indicates if STP is enabled on the port. Select this field to enable STP. • Port Fast - Indicates if Fast Link is enabled on the port. If Fast Link mode is enabled for a port, the Port State is automatically placed in the Forwarding state when the port link is up. Fast Link optimizes the STP protocol convergence. STP convergence can take 30 seconds in large networks. The possible field values are: - Enable - Indicates that Fast Link is enabled on the port. Cisco Small Business SLM Series Smart Switches Administration Guide 59