Cisco SPA122 Administration Guide - Page 103
Call Feature Settings, Xfer When Hangup Conf - bridging
View all Cisco SPA122 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Configuring Voice Configuring Voice Settings 4 Call Feature Settings Field Blind Attn-Xfer Enable MOH Server Xfer When Hangup Conf Conference Bridge URL Conference Bridge Ports Description Enables the ATA to perform an attended transfer operation by ending the current call leg and performing a blind transfer of the other call leg. If this feature is disabled, the ATA performs an attended transfer operation by referring the other call leg to the current call leg while maintaining both call legs. To use this feature, select yes. Otherwise, select no. Default setting: No User ID or URL of the auto-answering streaming audio server. When only a user ID is specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the MOH Server is not specified. Makes the ATA perform a transfer when a conference call has ended. Select yes or no from the drop-down menu. Default setting: Yes This feature supports external conference bridging for n-way conference calls (n>2), instead of mixing audio locally. To use this feature, set this parameter to that of the server's name. For example: [email protected]:12345 or conf (which uses the Proxy value as the domain) Select the maximum number of conference call participants. The range is 3 to 10. Default setting: 3 Cisco SPA100 Series Phone Adapters Administration Guide 103