Cisco SPA122 Administration Guide - Page 115
Web Access Management, Administration Settings, Field, Description
View all Cisco SPA122 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Administration Settings Management 5 Web Access Management Use the Administration > Management > Web Access Management page to configure the settings for access to the administration of the ATA. To open this page: Click Administration in the menu bar, and then click Management > Web Access Management in the navigation tree. After making changes, click Submit to save your settings, or click Cancel to abandon any unsaved entries. SPA112: Web Access Management Web access to the configuration utility is enabled by default. This feature allows you to manage the configuration from a computer in your office network and from your home computer via the Internet. To access the configuration utility, launch a web browser and enter the URL in the Address bar. The URL must include the specified protocol, the WAN IP address of the ATA, and the specified port number. For example, with the HTTPS protocol, a WAN IP address of 203.0.113.50, and port 80, you would enter: https://203.0.113.50:80 Field Web Utility Access Remote Management Port Description Select the protocol to use for access to the configuration utility from a device on the WAN. Choose HTTP and/or HTTPS. For secure Internet access, select HTTPS. The default value is HTTP. Enter the port number to use for access to the configuration utility from a device on the WAN. The default port number is 80. Cisco SPA100 Series Phone Adapters Administration Guide 115