Cisco SPA122 Administration Guide - Page 76
Ring Back 2 Tone
View all Cisco SPA122 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Configuring Voice Configuring Voice Settings 4 Field Busy Tone Reorder Tone Off Hook WarningTone Ring Back Tone Ring Back 2 Tone Confirm Tone SIT1 Tone SIT2 Tone SIT3 Tone Description Played when a 486 RSC is received for an outbound call. Default setting: 480@-5,620@-5;10(.5/.5/1+2) Played when an outbound call has failed, or after the far end hangs up during an established call. Reorder Tone is played automatically when Dial Tone or any of its alternatives times out. Default setting: 480@-5,620@5;10(.25/.25/1+2) Played when the caller has not properly placed the handset on the cradle. Off Hook Warning Tone is played when the Reorder Tone times out. Default setting: 480@3,620@3;10(.125/.125/1+2) Played during an outbound call when the far end is ringing. Default setting: 440@-5,480@-5;*(2/4/1+2) Your ATA plays this ringback tone instead of Ring Back Tone if the called party replies with a SIP 182 response without SDP to its outbound INVITE request. Default setting: the same as Ring Back Tone, except the cadence is 1s on and 1s off. Default setting: 440@5,480@-5;*(1/1/1+2) Brief tone to notify the user that the last input value has been accepted. Default setting: 600@-4;1(.25/.25/1) Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. Default setting: 985@-4,1428@-4,1777@-4;20(.380/0/ 1,.380/0/2,.380/0/3,0/4/0) Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. Default setting: 914@-4,1371@-4,1777@-4;20(.274/0/ 1,.274/0/2,.380/0/3,0/4/0) Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. Default setting: 914@-4,1371@-4,1777@-4;20(.380/0/ 1,.380/0/2,.380/0/3,0/4/0) Cisco SPA100 Series Phone Adapters Administration Guide 76