Cisco SPA122 Administration Guide - Page 44
Configuring Voice, Digit Sequence, Function, EXAMPLE 1 - asterisk
View all Cisco SPA122 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Configuring Voice Configuring Dial Plans 4 Digit Sequence , (comma) ! (exclamation point) *xx S0 or L0 Function Use this format to indicate that certain dialed digits are replaced by other characters when the sequence is transmitted. The dialed digits can be zero or more characters. EXAMPLE 1: xxxxxxx When the user presses 8 followed by a seven digit number, the system automatically replaces the dialed 8 with 1650. If the user dials 85550112, the system transmits 16505550112. EXAMPLE 2: xxxxxxxxxx In this example, no digits are replaced. When the user enters a 10-digit string of numbers, the number 1 is added at the beginning of the sequence. If the user dials 9725550112, the system transmits 19725550112. Enter a comma between digits to play an "outside line" dial tone after a user-entered sequence. EXAMPLE: 9, 1xxxxxxxxxx An "outside line" dial tone is sounded after the user presses 9, and the tone continues until the user presses 1. Enter an exclamation point to prohibit a dial sequence pattern. EXAMPLE: 1900xxxxxxx! The system rejects any 11-digit sequence that begins with 1900. Enter an asterisk to allow the user to enter a 2digit star code. Enter S0 to reduce the short inter-digit timer to 0 seconds, or enter L0 to reduce the long inter-digit timer to 0 seconds. Cisco SPA100 Series Phone Adapters Administration Guide 44