Cisco SPA122 Administration Guide - Page 58
Voice Provisioning Settings, Voice, Provisioning, Submit, Cancel, Configuration Profile - firmware upgrade
View all Cisco SPA122 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Configuring Voice Configuring Voice Settings 4 Voice Provisioning Settings Use the Voice > Provisioning page to configure various profiles and parameters. To open this page: Click Voice on the menu bar, and then click Provisioning in the navigation tree. Enter the settings as described below. After making changes, click Submit to save your settings, or click Cancel to abandon any unsaved entries. Configuration Profile Field Provision Enable Resync On Reset Resync Random Delay Resync Periodic Description Controls all resync actions independently of firmware upgrade actions. Set to Yes to enable remote provisioning. Default setting: Yes Triggers a resync after every reboot except for reboots caused by parameter updates and firmware upgrades. Default setting: Yes The maximum value for a random time interval that the ATA waits before making its initial contact with the provisioning server. This delay is effective only on the initial configuration attempt following power-on or reset. The delay is a pseudo-random number between zero and this value. This parameter is in units of 20 seconds; the default value of 2 represents 40 seconds. This feature is disabled when this parameter is set to zero. This feature can be used to prevent an overload of the provisioning server when a large number of devices power-on simultaneously. Default setting: 2 (40 seconds) The time interval between periodic resyncs with the provisioning server. The associated resync timer is active only after the first successful synchronization with the server. Set this parameter to zero to disable periodic resynchronization. Default setting: 3600 seconds Cisco SPA100 Series Phone Adapters Administration Guide 58