Cisco SPA122 Administration Guide - Page 48
Dial Plan Timer (Off-Hook Timer
View all Cisco SPA122 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Configuring Voice Configuring Dial Plans 4 Terminating Event A timeout occurs. The user presses the # key. Processing The number is rejected if the dialed digits are not matched to a digit sequence in the dial plan within the time specified by the applicable interdigit timer. • The Interdigit Long Timer applies when the dialed digits do not match any digit sequence in the dial plan. Default setting: 10 seconds • The Interdigit Short Timer applies when the dialed digits match one or more candidate sequences in the dial plan. Default setting: 3 seconds • If the sequence is complete and is allowed by the dial plan, the number is accepted and is transmitted according to the dial plan. • If the sequence is incomplete or is blocked by the dial plan, the number is rejected. Dial Plan Timer (Off-Hook Timer) You can think of the Dial Plan Timer as "the off-hook timer." This timer starts counting when the phone goes off hook. If no digits are dialed within the specified number of seconds, the timer expires and the null entry is evaluated. Unless you have a special dial plan string to allow a null entry, the call is rejected. Default setting: 5 Syntax for the Dial Plan Timer (Ps | dial plan ) • s: The number of seconds; if no number is entered after P, the default timer of 5 seconds applies. • n: (optional): The number to transmit automatically when the timer expires; you can enter a valid number. No wildcard characters are allowed because the number will be transmitted as shown. If you omit the number substitution, , then the user hears a reorder (fast busy) tone after the specified number of seconds. Cisco SPA100 Series Phone Adapters Administration Guide 48