Cisco SPA122 Administration Guide - Page 141
Using the IVR for Administration, IVR Actions, Option, Choices and Instructions, Set Static IP Address
View all Cisco SPA122 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Using the IVR for Administration B • If the menu is inactive for more than one minute, the IVR times out. You will need to re-enter the IVR menu by pressing the star key four times: ****. Your settings take effect after you hang up the telephone or exit the IVR. The ATA may reboot at this time. • To enter the decimal points in an IP address, press the * (star) key. For example, to enter the IP address 191.168.1.105, perform the following tasks: -Press these keys: 191*168*1*105 -Press the # (pound) key to indicate that you have finished entering the IP address. -Press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu. IVR Actions IVR Action Enter IVR Menu Check Internet Addressing Method Set Internet Addressing Method Menu Option **** 100 101 Check Internet IP 110 Address (INTERNET port) Set Static IP Address 111 (INTERNET port) Check Network Mask 120 Choices and Instructions DHCP: 0 Static IP: 1 PPPoE: Press 2 Enter the IP address by using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. Note: This option is available only after you choose Static IP as the Internet Connection Type, through option 101. Cisco SPA100 Series Phone Adapters Administration Guide 141