Cisco SPA122 Administration Guide - Page 66
Register Retry Long Intvl when retrying REGISTER
View all Cisco SPA122 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Configuring Voice Configuring Voice Settings 4 Field INVITE Expires ReINVITE Expires Reg Min Expires Reg Max Expires Reg Retry Intvl Reg Retry Long Intvl Reg Retry Random Delay Reg Retry Long Random Delay Description INVITE request Expires header value. If you enter 0, the Expires header is not included in the request. Default setting: 240. Range: 0-(231-1) ReINVITE request Expires header value. If you enter 0, the Expires header is not included in the request. Default setting: 30. Range: 0-(231-1) Minimum registration expiration time allowed from the proxy in the Expires header or as a Contact header parameter. If the proxy returns a value less than this setting, the minimum value is used. Default setting: 1. Maximum registration expiration time allowed from the proxy in the Min-Expires header. If the value is larger than this setting, the maximum value is used. Default setting: 7200. Interval to wait before the ATA retries registration after failing during the last registration. Default setting: 30. When registration fails with a SIP response code that does not match Retry Reg RSC, the ATA waits for the specified length of time before retrying. If this interval is 0, the ATA stops trying. This value should be much larger than the Reg Retry Intvl value, which should not be 0. Default setting: 1200 Random delay range (in seconds) to add to Register Retry Intvl when retrying REGISTER after a failure. Default setting: 0 (disabled) Random delay range (in seconds) to add to Register Retry Long Intvl when retrying REGISTER after a failure. Default setting: 0 (disabled) Cisco SPA100 Series Phone Adapters Administration Guide 66