Cisco SPA122 Administration Guide - Page 49
Examples for the Dial Plan Timer
View all Cisco SPA122 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Configuring Voice Configuring Dial Plans 4 Examples for the Dial Plan Timer NOTE Red text is used to highlight the elements that are explained in the examples. • Allow more time for users to start dialing after taking a phone off hook. (P9 | (9,8[2-9]xxxxxx | 9,8,1[2 9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[18]xx) P9 After taking a phone off hook, a user has 9 seconds to begin dialing. If no digits are pressed within 9 seconds, the user hears a reorder (fast busy) tone. By setting a longer timer, you allow more time for users to enter the digits. xx This code allows the entry of one or more digits. Do not use a single x, allowing 0 or more digits. This setting will produce unwanted results especially if you are deploying timers. • Create a hotline for all sequences on the System Dial Plan (P9 | (9,8[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx) P9 After taking the phone off hook, a user has 9 seconds to begin dialing. If no digits are pressed within 9 seconds, the call is transmitted automatically to extension 23. • Create a hotline on a line button for an extension (P0 ) With the timer set to 0 seconds, the call is transmitted automatically to the specified extension when the phone goes off hook. Cisco SPA100 Series Phone Adapters Administration Guide 49