Cisco SPA2102-AU Provisioning Guide - Page 46

Data Types Chapter 2 Creating Provisioning Scripts • Uns-Unsigned n-bit value, where n = 8, 16, or 32. It can be specified in decimal or hex format such as 12 or 0x18 as long as the value can fit into n bits. • Sig-Signed n-bit value. It can be specified in decimal or hex format. Negative values must be preceded by a "-" sign. A + sign before positive value is optional. • Str-A generic string with up to n non-reserved characters. • Float-A floating point value with up to n decimal places. • Time-Time duration in seconds, with up to n decimal places. Extra decimal places specified are ignored. • PwrLevel-Power level expressed in dBm with 1 decimal place, such as -13.5 or 1.5 (dBm). • Bool-Boolean value of either "yes" or "no." • {a,b,c,...}-A choice among a, b, c, ... • IP-IP Address in the form of x.x.x.x, where x between 0 and 255. For example 10.1.2.100. • Port-TCP/UDP Port number (0-65535). It can be specified in decimal of hex format. • UserID-User ID as appeared in a URL; up to 63 characters. • FQDN-Fully Qualified Domain Name, such as "sip.Linksys.com:5060", or "109.12.14.12:12345". It can contain up to 63 characters. • Phone-A phone number string, such as 14081234567, *69, *72, 345678, or a generic URL such as [email protected]:5068, or [email protected]. It can contain up to 39 characters. • ActCode-Activation code for a supplementary service, such as *69. It can contain up to 7 characters. • PhTmplt-A phone number template. Each template may contain one or more patterns separated by a ",". White space at the beginning of each pattern is ignored. "?" and "*" represent wildcard characters. To represent literally use %xx. For example, %2a represents *. It can contain up to 39 characters. Examples: "1408*, 1510*", "1408123????, 555?1.". • RscTmplt-A template of SIP Response Status Code, such as "404, 5*", "61?", "407, 408, 487, 481". It can contain up to 39 characters. • CadScript-A mini-script that specifies the cadence parameters of a signal. Up to 127 characters. Syntax: S1[;S2], where: Si=Di(oni,1/offi,1[,oni,2/offi,2[,oni,3/offi,3[,oni,4/offi,4[,oni,5/offi,5[,oni,6/offi,6]]]]]) and is known as a section, oni,j and offi,j are the on/off duration in seconds of a segment and i = 1 or 2, and j = 1 to 6. Di is the total duration of the section in seconds. All durations can have up to three decimal places to provide 1 ms resolution. The wildcard character "*" stands for infinite duration. The segments within a section are played in order and repeated until the total duration is played. Example 1: 60(2/4) Number of Cadence Sections = 1 Cadence Section 1: Section Length = 60 s Number of Segments = 1 Segment 1: On=2s, Off=4s Total Ring Length = 60s Example 2-Distinctive ring (short,short,short,long): 60(.2/.2,.2/.2,.2/.2,1/4) 2-20 Linksys SPA Provisioning Guide Version 3.0