Cisco SPA2102-AU Provisioning Guide - Page 64

Parameter Name, Description and Default Value, Resync_Error_Retry_Delay

Get Cisco SPA2102-AU PDF manuals and user guides View all Cisco SPA2102-AU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Configuration Profile Parameters Chapter 4 Provisioning Field Reference Table 4-1 Configuration Profile Parameters (continued) Parameter Name Resync_Random_Delay Resync_Periodic Resync_Error_Retry_Delay Description and Default Value The maximum value for a random time interval that the device waits before making its initial contact with the provisioning server. This delay is effective only on the initial configuration attempt following device power-on or reset. The delay is a pseudo-random number between zero and this value. This parameter is in units of 20 seconds; the default value of 2 represents 40 seconds. This feature is disabled when this parameter is set to zero. This feature can be used to prevent an overload of the provisioning server when a large number of devices power-on simultaneously. The default is 2 (40 seconds). The time interval between periodic resyncs with the provisioning server. The associated resync timer is active only after the first successful sync with the server. Set this parameter to zero to disable periodic resyncing. The default is 3600 seconds. Resync retry interval (in seconds) applied in case of resync failure. The device has an error retry timer that activates if the previous attempt to sync with the provisioning server fails. The device waits to contact the server again until the timer counts down to zero. This parameter is the value that is initially loaded into the error retry timer. If this parameter is set to zero, the device immediately retries to sync with the provisioning server following a failed attempt. The default is 3600 seconds. Linksys SPA Provisioning Guide 4-2 Version 3.0

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
4-2
Linksys SPA Provisioning Guide
Version 3.0
Chapter 4
Provisioning Field Reference
Configuration Profile Parameters
Resync_Random_Delay
The maximum value for a random time interval
that the device waits before making its initial
contact with the provisioning server. This delay
is effective only on the initial configuration
attempt following device power-on or reset. The
delay is a pseudo-random number between zero
and this value.
This parameter is in units of 20 seconds; the
default value of 2 represents 40 seconds. This
feature is disabled when this parameter is set to
zero.
This feature can be used to prevent an overload
of the provisioning server when a large number
of devices power-on simultaneously.
The default is 2
(40 seconds).
Resync_Periodic
The time interval between periodic resyncs with
the provisioning server. The associated resync
timer is active only after the first successful sync
with the server.
Set this parameter to zero to disable periodic
resyncing.
The default is 3600 seconds.
Resync_Error_Retry_Delay
Resync retry interval (in seconds) applied in case
of resync failure.
The device has an error retry timer that activates
if the previous attempt to sync with the
provisioning server fails. The device waits to
contact the server again until the timer counts
down to zero.
This parameter is the value that is initially loaded
into the error retry timer. If this parameter is set
to zero, the device immediately retries to sync
with the provisioning server following a failed
attempt.
The default is 3600 seconds.
Table 4-1
Configuration Profile Parameters (continued)
Parameter Name
Description and Default Value