Cisco SPA2102-AU Provisioning Guide - Page 71
Internal Error Codes
View all Cisco SPA2102-AU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 4 Provisioning Field Reference Internal Error Codes Table 4-4 Macro Expansion Variables (continued) Macro Name PORT PATH ERR UID1 UID2 ISCUST Macro Expansion Request target UDP/TCP port, as obtained after parsing resync or upgrade URL. Request target file path, as obtained after parsing resync or upgrade URL. Result message of resync or upgrade attempt. Only useful in generating result syslog messages. The value is preserved in the UPGERR variable in the case of upgrade attempts. The contents of the Line 1 User_ID configuration parameter (Firmware 2.0.11 and above). The contents of the Line 2 User_ID configuration parameter (Firmware 2.0.11 and above). Value=1 if unit is customized, 0 otherwise; customization status viewable on WebUI Info page. Internal Error Codes The SPA defines a number of internal error codes (X00-X99) to facilitate configuration in providing finer control over the behavior of the unit under certain error conditions. They can be viewed in Table 4-5. Table 4-5 Error Code Definitions Error Code X00 X20 X40 X60 Description Transport layer (or ICMP) error when sending a SIP request. SIP request times out while waiting for a response. General SIP protocol error (for example, unacceptable codec in SDP in 200 and ACK messages, or times out while waiting for ACK). Dialed number invalid according to given dial plan. Version 3.0 Linksys SPA Provisioning Guide 4-9