Cisco SRST User Guide - Page 27

Chapter 1 Cisco SRST SNMP MIB Support Prerequisites • An SNMP manager must be available on the network. For more information on configuring an SNMP server for use with a MIB, refer to the "Configuring SNMP Support" chapter of the Cisco IOS Configuration Fundamentals and Network Management Configuration Guide, Release 12.3. at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun_c/fcfprt3/fcf014.htm • An SNMP Agent must be configured for the router on which the CISCO-SRST-MIB feature is to be used. Refer to the "Enabling the SNMP Agent" section in this document for more information. • Ensure the traps are defined in the NMS software. • Ensure the alarm events are not put into "log only" mode and come up as an Alarm. Supported Platforms for SRST 3.4 The SRST 3.4 feature is supported on the platforms listed in the following sections. Cisco Voice Gateways The SRST 3.4 feature is supported on the following voice gateways: • Cisco IAD24xx • Cisco 17xx: 1751V and 1760 • Cisco 2600XM: 261x XM, 262x XM, 265x XM, and 2691 • Cisco 3600: 3640, 3640A, and 3660 • Cisco 37xx: 3725 and 3745 • Catalyst 4500 with AGM • Cisco 7200 Cisco IP Phones The SRST 3.4 feature is supported on the following Cisco IP phones: • Cisco IP Phone 7905 and 7905G • Cisco IP Phone 7910G • Cisco IP Phone 7902G • Cisco IP Phone 7912G • Cisco IP Expansion Module 7914 • Cisco IP Conference Station 7935 • Cisco IP Phone 7940 and 7940G • Cisco IP Phone 7960 and 7960G • Cisco VG248 Analog Phone Gateway Version 1.2(1) and higher • Cisco VG224 Analog phone gateway OL-7959-01 Cisco SRST SNMP MIB Release 3.4 Guide 1-13