Cisco SRST User Guide - Page 50

CISCO-SRST-MIB Object Groups Chapter 1 Cisco SRST SNMP MIB Support Table 1-6 MIB Group SRST MIB Object Groups and Descriptions (continued) MIB Object csrstScriptName csrstSecondaryDialTone csrstTransferSystem Max Access read-only read-only read-only Description Cisco SRST session-level IVR application script. This application can be written in Tool Command Language (TCL) and is applied to all Cisco IP phone lines served by the SRST router. If no application script name is configured, the default built-in IOS application will be applied to all phone lines served by the SRST router and this object will be a zero-length string. Cisco SRST secondary dial tone digits. When a Cisco IP phone user dials a PSTN access prefix, defined by the secondary dial tone digits, the secondary dial tone is enabled. Cisco SRST call transfer method using the ITU-T H.450.2 standard. Default setting is blind. blind (1), fullBlind (2), fullConsult (3), localConsult (4) blind - Calls are transferred without consultation using a single phone line and the Cisco proprietary method. fullBlind - Calls are transferred without consultation using H.450.2 standard methods. fullConsult - Calls are transferred using H.450.2 with consultation using the second phone line if available, or the calls fall back to full-blind if the second line is unavailable. localConsult - Calls are transferred with local consultation using the second phone line if available, or the calls fall back to blind for non- local consultation or transfer target. This mode is intended for use primarily in Voice over Frame Relay (VoFR) networks. 1-36 Cisco SRST SNMP MIB Release 3.4 Guide OL-7959-01