Cisco SRST User Guide - Page 49

Chapter 1 Cisco SRST SNMP MIB Support CISCO-SRST-MIB Object Groups Table 1-6 MIB Group SRST MIB Object Groups and Descriptions (continued) MIB Object Max Access Description csrstSipPhoneUnRegThresho read-write This object indicates a threshold for the number of SIP ld phones unregistered to SRST. This threshold is changeable by the NMS user. csrstCallFwdNoAnswer read-only Cisco SRST call forwarding number when a Cisco IP phone is not answered. This directory number is a fully qualified E.164 number. csrstCallFwdNoAnswerTo read-only Timeout in seconds if a Cisco IP phone is not answered, Cisco SRST will call forward to another directory number. csrstCallFwdBusy read-only Cisco SRST call forwarding number when a Cisco IP phone is busy. This directory number is a fully qualified E.164 number. csrstMohFilename read-only Cisco SRST Music-On-Hold is enabled with file on flash, or disabled without a file on flash. MOH is enabled by default. csrstMohMulticastAddrType read-only Internet address type governing the address type format for one or more InetAddress objects in this MIB. The associated InetAddress objects' description will refer back to this type object as appropriate. csrstMohMulticastAddr read-only This object indicates Cisco SRST Music-On-Hold Multicast IP address. When configured, this feature enables continuous IP multicast output of MOH from a Flash MOH file. This object has no significance if MOH is not configured. Default is the csrstIPAddress object for Cisco SRST. The type of IP address used here is indicated by the csrstMohMulticastAddrType object. csrstMohMulticastPort read-only This object indicates Cisco SRST Music-On-Hold Multicast TCP port which is range limited When configured, this feature enables csrstVoiceMailNumber read-only Cisco SRST voice mail number that is speed-dialed when the messages button on a Cisco IP phone is pressed. This voice mail number is a fully qualified E.164 number. If voice-mail number is not configured, this object will have a string length of 2 with the value '**'. csrstSystemMessagePrimary read-only Cisco SRST system static text message that is displayed on Cisco IP phone during fallback. Length of text string is less than 32 characters. Default message is 'CM Fallback Service Operating'. csrstSystemMessageSeconda read-only ry Cisco SRST system message that is displayed on Cisco IP phone that does not support static text message and have a limited display space during fallback. Length of text string is less than 20 characters. Default messages is 'CM Fallback Service'. OL-7959-01 Cisco SRST SNMP MIB Release 3.4 Guide 1-35