Cisco SRST User Guide - Page 54

CISCO-SRST-MIB Object Groups Chapter 1 Cisco SRST SNMP MIB Support Table 1-6 SRST MIB Object Groups and Descriptions (continued) MIB Group csrstSipConfGroup MIB Object csrstTotalUpTime Max Access read-only Description Accumulated total number of minutes that router is active in SRST mode. csrstSipRegSrvExpMax read-only This object indicates the maximum expiration time for the SIP Registrar Server to timeout on a registration. csrstSipRegSrvExpMin read-only This object indicates the minimum expiration time for the SIP Registrar Server to timeout on a registration. csrstSipIp2IpGlobalEnabled read-only This object indicates whether voip calls are re-directed IP to IP globally. csrstSipSend300MultSuppor read-only This object indicates whether the redirect contact order t is best or longest match. This applies globally for SIP. bestMatch (1), longestMatch (2) bestMatch - Uses the current system configuration to set the order of contacts. longestMatch - Sets the contact order by using the destination pattern longest match first, and then the second longest match, the third longest match, etc. csrstSipVoRegPoolTag not-accessi A unique identifier tag configured for a voice register ble pool entry. csrstSipNetId read-only This object indicates the network identification information of the SIP voice register pool configured on this router. This object can be the network Id, IP address, or MAC address. csrstSipVoRegPoolIpAddrTy read-only pe Internet address type governing the address type format for one or more InetAddress objects in this MIB. The associated InetAddress objects' description will refer back to this type object as appropriate. csrstSipNetMask read-only This object indicates the IP subnet configured for the SIP voice register pool. The type of IP subnet used here is indicated by the csrstSipVoRegPoolIpAddrType object. csrstSipProxySrvIpAddr read-only This object indicates the IP address of the proxy server configured for the SIP voice register pool. The type of IP address used here is indicated by the csrstSipVoRegPoolIpAddrType object. csrstSipProxySrvPref read-only This object indicates the preference order for creating the VoIP dial peers in the voice register pool. Setting the preference enables the desired dial peer to be selected when multiple dial peers within a hunt group are matched for a dial string. A value of 0 has the highest preference. 1-40 Cisco SRST SNMP MIB Release 3.4 Guide OL-7959-01