Cisco SRST User Guide - Page 48
MIB Group, MIB Object, Access, Description, Skinny Client Control Protocol SCCP and is range - router configuration
UPC - 882658171475
View all Cisco SRST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
CISCO-SRST-MIB Object Groups Chapter 1 Cisco SRST SNMP MIB Support Table 1-6 SRST MIB Object Groups and Descriptions MIB Group csrstConfGroup MIB Object csrstEnabled csrstVersion csrstIPAddressType csrstIPAddress csrstPortNumber csrstMaxConferences csrstMaxEphones csrstMaxDN Max Access Description read-only Cisco SRST support is enabled or disabled. When enabled, the router is in fallback mode to provide call-handling support to IP phones. If disabled, all of the objects in this group have no significance. read-only Cisco SRST version. read-only Internet address type governing the address type format for one or more InetAddress objects in this MIB. The associated InetAddress objects' description will refer back to this type object as appropriate. read-only Cisco SRST IP address for the router to receive messages from IP phones, typically one of the addresses of an Ethernet port of the router. The type of IP address used here is indicated by the csrstSysIPAddressType object. read-only This object indicates the TCP port number to use for Skinny Client Control Protocol (SCCP) and is range limited. This port also indicates through which IP phones communicate with SRST. read-only Maximum number of simultaneous three-party conference calls configured on the router. Range is IOS version and platform dependent. With SRST Version 3.0 onwards, the following are the maximum values for each platform - Cisco 1751, Cisco 1760, Cisco 2600, Cisco 3640 - 8 conferences. Cisco 3660, Cisco 3725, Cisco 3745 - 16 conferences. Default is half the maximum number of simultaneous three-party conferences for each platform. read-only Maximum number of Cisco IP phones configured on the SRST router. Range is IOS version and platform dependent. read-only Maximum number of IP phones extensions (Ephone-dns) or directory number configured on this SRST router. Range is IOS version and platform dependent. Default is 0." -- This object is changeable by NMS to set a threshold -- for a trap to be reported. This refers to SIP phones -only. 1-34 Cisco SRST SNMP MIB Release 3.4 Guide OL-7959-01