Cisco SRST User Guide - Page 56

CISCO-SRST-MIB Object Groups Chapter 1 Cisco SRST SNMP MIB Support Table 1-6 SRST MIB Object Groups and Descriptions (continued) MIB Group MIB Object Max Access Description csrstSipEndpointIpAddress read-only This object indicates the SIP endpoint IP address configured on this router. The type of IP address used here is indicated by the csrstSipEndpointIpAddrType object. csrstSipEndpointDN read-only This object indicates the SIP phone's DN or line number assigned to the SIP endpoint. csrstActiveStatsGroup csrstSipVoRegNumberListTa read-only This object indicates the particular index of the g number list configured for the corresponding voice register pool. csrstState read-only This object indicates the current state of Cisco SRST feature on this router. Active - At least one IP or SIP phone is registered Inactive - Cisco SRST has no IP or SIP phones registered csrstSipPhoneCurrentRegiste read-only Total number of SIP phones currently registered to the red SRST router. csrstSipCallLegs read-only Total number of SIP call legs routed through the SRST router since going active. This includes incoming and outgoing calls. csrstTotalUpTime read-only Accumulated total number of minutes that router is active in SRST mode. csrstMIBNotifsGroup csrstStateChange notificatio An SRST up or down state change notification is n generated. This indicates one or more phones is registered to the SRST router or none is registered. csrstSysNotifSeverity csrstState csrstSysNotifReason csrstFailNotif notificatio A failure notification is generated when the SRST n router encounters a catastrophic failure. 1-42 Cisco SRST SNMP MIB Release 3.4 Guide OL-7959-01