Cisco UBR904 Troubleshooting Guide - Page 20

Command Reference, Table 2, Show Controllers Cable-Modem Field Descriptions Continued, Field

Page 20 highlights

Command Reference Table 2 Show Controllers Cable-Modem Field Descriptions (Continued) Field Timezone Offset Config filename buffer size RX data PDU ring: rx_head rx_p RX MAC message ring: rx_head_mac rx_p_mac TX BD ring: tx_count tx_head head_txp tx_tail tail_txp TX PD ring: tx_head_pd tx_tail_pd ehdr MIB Statistics: DS fifo full rerequests DS mac msg overruns DS data overruns Qualified maps Qualified syncs CRC fails HDR chk fails Data pdus Description Correction received from the DHCP server to synchronize the cable modem time clock with the CMTS. Name of the file stored on the cable company's TFTP server that contains operational parameters for the cable modem. Size in bytes of the BCM3220 message buffers. Indicates the memory location of the beginning of buffer information for the receive data ring. Indicates current head buffer descriptor. Indicates current head packet descriptor. Indicates the memory location of the beginning of buffer information for the receive MAC message ring. Indicates current head buffer descriptor. Indicates current head packet descriptor. Indicates the memory location of the beginning of buffer information for the transmit buffer descriptor ring. If tx_count is 0, or if tx_head and tx_tail are equal and there is no change for a period of time, it means there are packets stuck on the ring. This condition may be caused by the headend not giving grants. The next packet descriptor to get used, along with its index. The next packet descriptor to get sent, along with its index. When head_txp and tail_txp are the same, the transmit queue is empty. Indicates the memory location of the beginning of buffer information for the transmit packet descriptor ring. Indicates current head packet descriptor. Indicates current tail packet descriptor. Extended MCNS header. Number of times the downstream input first-in first-out (FIFO) buffer became full on the uBR904. Number of times a bandwidth request generated by the uBR904 was not responded to by the CMTS. Number of times the uBR904's DMA controller had a downstream MAC message and there were no free MAC message buffer descriptors to accept the message. Number of times the uBR904's DMA controller had downstream data and there were no free data PDU buffer descriptors to accept the data. Number of times a MAP message passed all filtering requirements and was received by the uBR904. Number of times a timestamp message was received by the uBR904. Number of times a MAC message failed a cyclic redundancy (CRC) check. Number of times a MAC header failed its 16-bit CRC check. The MAC header CRC is a 16-bit Header Check Sequence (HCS) field that ensures the integrity of the MAC header even in a collision environment. Total number of data PDUs (protocol data units) of all types received by the uBR904. 20 Cisco IOS Release 12.0(3)T

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

Command Reference
20
Cisco IOS Release 12.0(3)T
Timezone Offset
Correction received from the DHCP server to synchronize the cable modem time clock
with the CMTS.
Config filename
Name of the file stored on the cable company’s TFTP server that contains operational
parameters for the cable modem.
buffer size
Size in bytes of the BCM3220 message buffers.
RX data PDU ring:
rx_head
rx_p
Indicates the memory location of the beginning of buffer information for the receive
data ring.
Indicates current head buffer descriptor.
Indicates current head packet descriptor.
RX MAC message ring:
rx_head_mac
rx_p_mac
Indicates the memory location of the beginning of buffer information for the receive
MAC message ring.
Indicates current head buffer descriptor.
Indicates current head packet descriptor.
TX BD ring:
tx_count
tx_head
head_txp
tx_tail
tail_txp
Indicates the memory location of the beginning of buffer information for the transmit
buffer descriptor ring.
If tx_count is 0, or if tx_head and tx_tail are equal and there is no change for a period of
time, it means there are packets stuck on the ring. This condition may be caused by the
headend not giving grants.
The next packet descriptor to get used, along with its index.
The next packet descriptor to get sent, along with its index. When head_txp and tail_txp
are the same, the transmit queue is empty.
TX PD ring:
tx_head_pd
tx_tail_pd
ehdr
Indicates the memory location of the beginning of buffer information for the transmit
packet descriptor ring.
Indicates current head packet descriptor.
Indicates current tail packet descriptor.
Extended MCNS header.
MIB Statistics:
DS fifo full
Number of times the downstream input first-in first-out (FIFO) buffer became full on
the uBR904.
rerequests
Number of times a bandwidth request generated by the uBR904 was not responded to
by the CMTS.
DS mac msg overruns
Number of times the uBR904’s DMA controller had a downstream MAC message and
there were no free MAC message buffer descriptors to accept the message.
DS data overruns
Number of times the uBR904’s DMA controller had downstream data and there were no
free data PDU buffer descriptors to accept the data.
Qualified maps
Number of times a MAP message passed all filtering requirements and was received by
the uBR904.
Qualified syncs
Number of times a timestamp message was received by the uBR904.
CRC fails
Number of times a MAC message failed a cyclic redundancy (CRC) check.
HDR chk fails
Number of times a MAC header failed its 16-bit CRC check. The MAC header CRC is a
16-bit Header Check Sequence (HCS) field that ensures the integrity of the MAC
header even in a collision environment.
Data pdus
Total number of data PDUs (protocol data units) of all types received by the uBR904.
Table 2
Show Controllers Cable-Modem Field Descriptions (Continued)
Field
Description