Cisco UBR904 Troubleshooting Guide - Page 44
show controllers cable-modem phy, TFTP Server IP Address
View all Cisco UBR904 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Command Reference Table 8 Show Controllers Cable-Modem MAC State Field Descriptions (Continued) Field TEK Grace Time Auth. Reject Wait Time Assigned SID Max Downstream Rate Max Upstream Rate Upstream Priority Min Upstream Rate Max Upstream Burst Privacy Enable Ranging Backoff Start Ranging Backoff End Data Backoff Start Data Backoff End IP Address Net Mask TFTP Server IP Address Time Server IP Address Config File Name Time Zone Offset Description The number of seconds before the current TEK is set to expire that the TEK grace timer begins, signaling the TEK state machine to request a replacement key. Number of seconds the cable modem waits before sending another Authorization Request message to the CMTS after it has received an Authorization Reject message. Service ID assigned by the CMTS for the corresponding service class. Maximum downstream rate in bits per second that the CMTS is permitted to forward to CPE unicast MAC addresses learned or configured as mapping to this uBR904. (This does not include MAC packets addressed to broadcast or multicast MAC addresses.) Maximum upstream rate in bits per second that the uBR904 is permitted to forward to the RF network. This includes packet PDU data packets addressed to broadcast or multicast addresses. Relative priority assigned to this service class for data transmission in the upstream channel. Higher numbers indicate higher priority. Date rate in bits per second that will be guaranteed to this service class on the upstream channel. Maximum transmit burst in bytes allowed for this service class on the upstream channel. Indicates whether or not Baseline Privacy is enabled for this service class. Initial back-off window for initial ranging contention, expressed as a power of 2. Valid values are from 0 to 15. Final back-off window for initial ranging contention, expressed as a power of 2. Valid values are from 0 to 15. Initial back-off window for contention data and requests, expressed as a power of 2. Valid values are from 0 to 15. Final back-off window for contention data and requests, expressed as a power of 2. Valid values are from 0 to 15. IP address of the cable interface. Subnet mask of the cable interface. IP address of the CMTS TFTP server. IP address of the CMTS Time of Day (TOD) server. Name of the configuration file that is downloaded from the TFTP server to provide the cable modem with operational parameters. Correction received from the DHCP server to synchronize the cable modem time clock with the CMTS. Related Commands show controllers cable-modem show controllers cable-modem bpkm show controllers cable-modem des show controllers cable-modem filters show controllers cable-modem lookup-table show controllers cable-modem phy show controllers cable-modem tuner 44 Cisco IOS Release 12.0(3)T