Cisco WAE-674-K9 Hardware Installation Guide - Page 38
Slide Rail Hooks, Step 5
UPC - 882658200076
View all Cisco WAE-674-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installing the Wide Area Application Engine Chapter 3 Installing the Wide Area Application Engine 1 Lock indicator 2 Slide Rail Hooks Note When locked in position, an indicator (labeled 1 in Figure 3-5) is visible on each side of the appliance. To remove the appliance from the rack, lift up on the lock indicator and slide the appliance forward. Step 5 Lift the locking levers (labeled 1 in Figure 3-6) on the slide rails and slide the appliance into the rack until it extends approximately 4 inches (10.16 cm) from the edge of the rack. Figure 3-6 Sliding in the WAE 185088 1 1 Locking levers Step 6 Attach the cable-management assembly to the rear of the slide rail using a hinge pin (labeled 1 in Figure 3-7). Attach the free end of the cable-management assembly to the slide rail using a hinge pin. Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide 3-8 OL-15012-02