Cisco WAP200E User Guide - Page 28

WPA2-Enterprise, WPA2-Enterprise Mixed - configuration

Page 28 highlights

Wireless-G Access Point with Power Over Ethernet and Rangebooster WPA2-Enterprise This option features WPA2 used in coordination with a RADIUS server for client authentication. (This should only be used when a RADIUS server is connected to the Access Point.) RADIUS Server IP Address. Enter the RADIUS server's IP address. RADIUS Server Port. Enter the port number used by the RADIUS server. The default is 1812. WPA Algorithm. WPA2 always uses AES for data encryption. Shared Secret. Enter the Shared Secret key used by the Access Point and RADIUS server. Key Renewal Timeout. Enter a Key Renewal Timeout period, which instructs the Access Point how often it should change the encryption keys. The default is 3600 seconds. WPA2-Enterprise Mixed This security mode supports the transition from WPA-Enterprise to WPA2-Enterprise. You can have client devices that use either WPA-Enterprise or WPA2-Enterprise. The Access Point will automatically choose the encryption algorithm used by each client device. RADIUS Server IP Address. Enter the RADIUS server's IP address. RADIUS Server Port. Enter the port number used by the RADIUS server. The default is 1812. WPA Algorithm. Mixed Mode automatically chooses TKIP or AES for data encryption. Shared Secret. Enter the Shared Secret key used by the Access Point and RADIUS server. Key Renewal Timeout. Enter a Key Renewal Timeout period, which instructs the Access Point how often it should change the encryption keys. The default is 3600 seconds. Figure 6-10: Wireless - Wireless Security (WPA2Enterprise) Chapter 6: Configuring the Wireless-G Access Point The Wireless - Wireless Security Tab Figure 6-11: Wireless - Wireless Security (WPA2 Enterprise Mixed) 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

22
Chapter 6: Configuring the Wireless-G Access Point
The Wireless - Wireless Security Tab
Wireless-G Access Point with Power Over Ethernet and Rangebooster
WPA2-Enterprise
This option features WPA2 used in coordination with a RADIUS server for client authentication. (This should only
be used when a RADIUS server is connected to the Access Point.)
RADIUS Server IP Address
. Enter the RADIUS server’s IP address.
RADIUS Server Port
. Enter the port number used by the RADIUS server. The default is 1812.
WPA Algorithm
. WPA2 always uses AES for data encryption.
Shared Secret
. Enter the Shared Secret key used by the Access Point and RADIUS server.
Key Renewal Timeout
. Enter a Key Renewal Timeout period, which instructs the Access Point how often it
should change the encryption keys. The default is
3600
seconds.
WPA2-Enterprise Mixed
This security mode supports the transition from WPA-Enterprise to WPA2-Enterprise. You can have client devices
that use either WPA-Enterprise or WPA2-Enterprise. The Access Point will automatically choose the encryption
algorithm used by each client device.
RADIUS Server IP Address
. Enter the RADIUS server’s IP address.
RADIUS Server Port
. Enter the port number used by the RADIUS server. The default is 1812.
WPA Algorithm
. Mixed Mode automatically chooses TKIP or AES for data encryption.
Shared Secret
. Enter the Shared Secret key used by the Access Point and RADIUS server.
Key Renewal Timeout
. Enter a Key Renewal Timeout period, which instructs the Access Point how often it
should change the encryption keys. The default is
3600
seconds.
Figure 6-10: Wireless - Wireless Security (WPA2-
Enterprise)
Figure 6-11: Wireless - Wireless Security (WPA2 -
Enterprise Mixed)