Coby TF-DVD500 Instruction Manual - Page 11

Playing a Disc Basic Playback 1. Slide the Power Switch to ON position to turn on the unit. Power management: If the player will not be used for a long period of time, push the power switch to OFF position. 2. Load a disc Press the OPEN button to open the DVD door and insert a disc with the label up. Close the DVD door by hand. a). If the single sided disc is placed upside down, "NO DISC" or "BAD DISC" will appear on screen. b). After playing back all of the chapters in the title, the player will stop automatically and show the menu screen. 3. Start playback Press the ENTER/PLAY button to start playing. (Some disc may play automatically). If a DVD disc menu appears on screen, Press the Direction buttons to select the desired feature in the menu. e o O Press ENTER to confirm a selection in the menu. 4. Adjust the volume Turn the volume control on main unit to the desired volume level. Problem disc messages The following message will be displayed on screen when there is a format problem with loaded disc. "WRONG REGIONAL DISC" Region code of the disc is not matching to the player's. (Region 1 to region 6) "WRONG PASSWORD" The rating level of the disc is higher than the rating level setting of the player. The player will not play the disc. "WRONG DISC" The player is equipped with automatic disc quality detection software. When the player detects a problem or damaged disc, the unit may play the disc at a lower quality or stop completely, depending on the damaged level of the disc. While the disc is detected as a problem or damaged one, the LCD will display "DISC Err. Problem qualities of DVD discs vary. Some discs may deviate from the industry standard. Some incorrectly formatted discs may be played. However, the playback and operational quality may be substandard. 6