Compaq 400338-001 Compaq Server Console Switch User Guide - Page 40
Connecting the Power Cable to the Dual Console 8-Port DC Switch Box
UPC - 743172745156
View all Compaq 400338-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Cabling Connecting the Power Cable to the Dual Console 8-Port DC Switch Box Use only #18 AWG stranded wire UL 1007 or UL 1015 (not included with the console switch). The maximum length should not exceed 10 meters (32.8 feet). WARNING: Always disconnect power before changing any wiring. WARNING: To reduce the risk of electric shock or damage to the equipment this product must be installed in accordance with the following guidelines: • This product is intended to be connected to a DC power source that can be classified as a secondary circuit in accordance with applicable national requirements for Information Technology Equipment. Generally, these requirements are based on the International Standard for Safety for Information Technology Equipment, IEC 950. The source must have one pole (Neutral/Return) referenced to earth ground in accordance with local/regional electric codes and/or regulations. • This product is intended to be installed only in areas that comply with ETSI-300-132-2. • This product must be connected to a power distribution device that provides a means for disconnecting power from the branch supply circuit. The power distribution device must be provided with an overcurrent protective device suitable for interrupting fault currents available from the main source, and rated no more than 0.3 A at the distribution device. The green/yellow lead of the power cable assembly must be connected to a suitable ground/earth terminal on the power distribution unit. Do not rely on the rack or cabinet chassis to provide adequate ground/earth continuity. 3-6 Compaq Server Console Switch User Guide