Compaq 400338-001 Compaq Server Console Switch User Guide - Page 42
Switch Box Startup Behavior
UPC - 743172745156
View all Compaq 400338-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Cabling 1. Plug connector (1) into receptacle. Do not use ground connection through connector. 2. Insert stripped wires (2) and tighten screws (3). 3 + - 1 2 Figure 3-8: Connecting the wires Switch Box Startup Behavior It is important to turn on the console switch before turning on the computers because when the servers boot up, their drivers send device settings to the console switch. During startup, the console switch does the following: • Identifies the mouse and keyboard and puts them into default states. • Switches to port 1 by default, and displays the number "1" in the status flag displayed on the monitor. If the status flag default setting has been changed to Names mode, the status flag displays the port name instead of the port number. If a status flag is not shown on the monitor, make sure the computer is connected and powered up. 3-8 Compaq Server Console Switch User Guide