Compaq DC7600 HP Compaq dx 7200 and dc7600 Personal Computers, Technical Refer - Page 41

System Overview 2.5 Specifications This section includes the environmental, electrical, and physical specifications for the systems covered in this guide. Where provided, metric statistics are given in parenthesis. Specifications are subject to change without notice. Table 2-7 Environmental Specifications (Factory Configuration) Parameter Operating Non-operating Ambient Air Temperature 50o to 95o F (10o to 35o C, max. rate of change < 10°C/Hr) -24o to 140o F (-30o to 60o C, max. rate of change < 20°C/Hr ) Shock (w/o damage) Vibration Humidity 5 Gs [1] 0.000215 G2/Hz, 10-300 Hz 10-90% Rh @ 28o C max. wet bulb temperature 20 Gs [1] 0.0005 G2/Hz, 10-500 Hz 5-95% Rh @ 38.7o C max. wet bulb temperature Maximum Altitude 10,000 ft (3048 m) [2] 30,000 ft (9144 m) [2] NOTE: [1] [2] Peak input acceleration during an 11 ms half-sine shock pulse. Maximum rate of change: 1500 ft/min. Table 2-8 Electrical Specifications Parameter U.S. Input Line Voltage: Nominal: Maximum: 100-240 VAC 90-264 VAC Input Line Frequency Range: Nominal: Maximum: 50-60 Hz 47-63 Hz Power Supply: Maximum Continuous Power: USDT ST or SFF MT CMT Maximum Line Current Draw: USDT SF or SFF MT CMT 200 watts 240 watts 300 watts 365 watts 4 A @ 100 VAC 5 A @ 100 VAC 5.4 A @ 100 VAC 6 A @ 100 VAC . International 100-240 VAC 90-264 VAC 50-60 Hz 47-63 Hz 200 watts 240 watts 300 watts 365 watts 2 A @ 200 VAC 2.5 A @ 200 VAC 2.7 A @ 200 VAC 3.0 A @ 200 VAC Technical Reference Guide www.hp.com 2-25