Compaq DC7600 HP Compaq dx 7200 and dc7600 Personal Computers, Technical Refer - Page 67
The Advanced Programmable Interrupt Controller APIC mode provides enhanced interrupt, APIC Mode - sff windows 8 1 supported
UPC - 882780682009
View all Compaq DC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
System Support APIC Mode The Advanced Programmable Interrupt Controller (APIC) mode provides enhanced interrupt processing with the following advantages: ■ Eliminates the processor's interrupt acknowledge cycle by using a separate (APIC) bus ■ Programmable interrupt priority ■ Additional interrupts (total of 24) The APIC mode accommodates eight PCI interrupt signals (INTA-..INTH-) for use by PCI devices. The PCI interrupts are evenly distributed to minimize latency and wired as follows: INTAINTBINTCINTDINTEINTFINTGINTH- Wired to PCI Slot 1 INTA- INTB- - INTCINTD- PCI Slot 2 INTD- INTA- - INTBINTC- PCI Slot 3 INTB- INTC- - INTDINTA- PCI Slot 4 INTD- INTA- - INTBINTC- NOTES: [1] Connection internal to the ICH. Will be reported by BIOS as using INTA but is NOT shared with other functions using INTA. CMT form factors only. SFF, ST, CMT form factors only. The PCI interrupts can be configured by PCI Configuration Registers 60h..63h to share the standard ISA interrupts (IRQn). ✎ The APIC mode is supported by the Windows NT, Windows 2000, and Windows XP operating systems. Systems running the Windows 95 or 98 operating system will need to run in 8259 mode. Technical Reference Guide www.hp.com 4-13