Compaq ML310 User Guide - Page 18
Hot-plug SATA or SAS IDs
![]() |
UPC - 613326264973
View all Compaq ML310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 HP ProLiant ML310 Generation 3 Server User Guide Activity LED (1) Flashing Off Off Online LED (2) Flashing Off Off Fault LED Interpretation (3) Flashing Do not remove the drive. Removing a drive may cause data loss in non-fault-tolerant configurations. Either (1) the drive is part of an array being selected by an array configuration utility; (2) Drive Identification has been selected in HP SIM; or (3) drive firmware is being updated. On The drive has been placed offline due to hard disk drive failure of subsystem communication failure. You may need replace the drive. Off Either (1) the drive is not configured as part of an array; (2) the drive is configured as part of an array, but it is a replacement drive that is not being accessed or being rebuilt yet; or (3) the drive is configured as an online spare. If the drive is connected to an array controller, you may replace the drive online. Hot-plug SATA or SAS IDs
![](/manual_guide/products/compaq-ml310-user-guide-69993ce/18.png)