Compaq ML310 User Guide - Page 50
Diskette drives, A diskette drive can be installed in the server in the following ways
![]() |
UPC - 613326264973
View all Compaq ML310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
50 HP ProLiant ML310 Generation 3 Server User Guide 7. Install the retaining screw. IMPORTANT: HP recommends installing the tape drive on a separate SCSI cable to avoid a decrease in performance on other SCSI devices. 8. Connect the data and power cables to the back of the tape drive. 9. Connect the data cable into a SCSI controller channel ("System board components" on page 11). 10. Remove the applicable bezel blanks from the bezel ("Front panel components" on page 7). 11. Install the bezel ("Unlocking the bezel" on page 22). 12. Replace the access panel ("Removing the access panel" on page 22). Diskette drives A diskette drive can be installed in the server in the following ways: • Install a diskette drive in the chassis ("Installing a legacy diskette drive" on page 51) • Install a diskette drive using a USB cable (when using operating systems that support USB) ("Installing a USB diskette drive" on page 52)
![](/manual_guide/products/compaq-ml310-user-guide-69993ce/50.png)