Compaq ML310 User Guide - Page 36
Prepare the heatsink for installation, Close the processor locking lever.
![]() |
UPC - 613326264973
View all Compaq ML310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
36 HP ProLiant ML310 Generation 3 Server User Guide To install the component: 1. Power down the server ("Powering down the server" on page 21). 2. Remove the bezel ("Unlocking the bezel" on page 22). 3. Remove the access panel ("Removing the access panel" on page 22). 4. Disconnect the fan cable from the system board ("System board components" on page 11). 5. Open the processor retaining bracket. 6. Place the processor into the processor socket. 7. Close the processor locking lever. CAUTION: To prevent possible server malfunction or damage to the equipment, be sure to completely close the processor locking lever. 8. Prepare the heatsink for installation: - If reusing the heatsink, clean the bottom of the heatsink with the provided alcohol pad, then apply a thin layer of thermal grease to the top of the processor. - If installing a new heatsink, remove the protective covering. 9. Install the heatsink fan assembly. 10. Tighten the four heatsink retaining screws.
![](/manual_guide/products/compaq-ml310-user-guide-69993ce/36.png)