Compaq Presario CQ61-400 Compaq Presario CQ61 Notebook PC and HP G61 Notebook - Page 46
Remove the Phillips PM2.0×3.0 screw, by pulling it away from the slot at an angle.
View all Compaq Presario CQ61-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Removal and replacement procedures 3. Disconnect the 2 WLAN antenna cables from the WLAN module. ✎ The black WLAN antenna cable 1 is connected to the WLAN module "Main" terminal. The gray WLAN antenna cable 2 is connected to the WLAN module "Aux" terminal. 4. Remove the Phillips PM2.0×3.0 screw 3 that secures the WLAN module to the base enclosure. (The edge of the module opposite the slot rises away from the computer.) 5. Remove the WLAN module 4 by pulling it away from the slot at an angle. ✎ WLAN modules are designed with a notch 5 to prevent incorrect insertion into the WLAN module slot. ✎ The wireless module compartment accepts both full-size and half-size modules. Reverse this procedure to install the WLAN module. Maintenance and Service Guide 4-9