Compaq Presario CQ61-400 Compaq Presario CQ61 Notebook PC and HP G61 Notebook - Page 54
to which the keyboard cable is attached, and then disconnect, the keyboard cable
View all Compaq Presario CQ61-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Removal and replacement procedures 2. Turn the computer right-side up, with the front toward you. 3. Open the computer as far as possible. 4. Lift the rear edge 1 of the keyboard until it rests at an angle. 5. Slide the keyboard 2 back until the tabs on the bottom of the keyboard are clear of the keyboard cover. 6. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and then disconnect the keyboard cable 2 from the system board. Reverse this procedure to install the keyboard. Maintenance and Service Guide 4-17
Removal and replacement procedures
Maintenance and Service Guide
4–17
2. Turn the computer right-side up, with the front toward you.
3. Open the computer as far as possible.
4. Lift the rear edge
1
of the keyboard until it rests at an angle.
5. Slide the keyboard
2
back until the tabs on the bottom of the keyboard are clear of the keyboard cover.
6.
Release the zero insertion force (ZIF) connector
1
to which the keyboard cable is attached, and then disconnect
the keyboard cable
2
from the system board.
Reverse this procedure to install the keyboard.