Compaq Presario CQ61-400 Compaq Presario CQ61 Notebook PC and HP G61 Notebook - Page 47

Hard drive, Loosen the four Phillips PM2.5×5.5 captive screws

Get Compaq Presario CQ61-400 - Notebook PC PDF manuals and user guides View all Compaq Presario CQ61-400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Removal and replacement procedures Hard drive ✎ The hard drive spare part kit includes a hard drive bracket. Description 500 GB, 5400 rpm 320 GB, 7200 rpm 320 GB, 5400 rpm 250 GB, 7200 rpm 250 GB, 5400 rpm 160 GB, 7200 rpm 160 GB, 5400 rpm Hard Drive Hardware Kit (includes hard drive bracket and screws) Spare part number 577086-001 575599-001 577084-001 575598-001 577082-001 580528-001 577080-001 531204-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). Remove the hard drive: 1. Loosen the four Phillips PM2.5×5.5 captive screws 1 that secure the hard drive cover to the base enclosure. 2. Lift the right side of the cover 2, swing it up and to the left, and then remove the cover. The hard drive cover is included in the Plastics Kit, spare part number 531517-001. 4-10 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
4–10
Maintenance and Service Guide
Removal and replacement procedures
Hard drive
✎
The hard drive spare part kit includes a hard drive bracket.
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-7
).
Remove the hard drive:
1. Loosen the four Phillips PM2.5×5.5 captive screws
1
that secure the hard drive cover to the base enclosure.
2.
Lift the right side of the cover
2
, swing it up and to the left, and then remove the cover. The hard drive cover is
included in the Plastics Kit, spare part number 531517-001.
Description
Spare part number
500 GB, 5400 rpm
577086-001
320 GB, 7200 rpm
575599-001
320 GB, 5400 rpm
577084-001
250 GB, 7200 rpm
575598-001
250 GB, 5400 rpm
577082-001
160 GB, 7200 rpm
580528-001
160 GB, 5400 rpm
577080-001
Hard Drive Hardware Kit (includes hard drive bracket and screws)
531204-001