Compaq dx7400 Service Reference Guide - HP Compaq dx7400 Business PC - Page 18
Computer Setup F10 Utility, Computer Setup-Advanced continued
![]() |
View all Compaq dx7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Table 2-4 Computer Setup-Advanced (continued) ● 2F8/IRQ3 ● 3E8/IRQ4 ● 2E8/IRQ3 Onboard Parallel Port Allows you to select a setting for the onboard parallel port: ● Disabled ● 378/IRQ7 ● 278/IRQ5 ● 3BC/IRQ7 Parallel Port Mode Allows you to select parallel port mode: ● SPP ● EPP ● ECP ● ECP+EPP ● Normal After AC Power Loss Allows you to select system power loss behavior: ● On ● Off ● Last State Wake on PCI Device from S5 Disables/enables waking up from S5 by PCI device. RTC Alarm Resume Disables/enables RTC (real-time clock) alarm. Date (of Month) If RTC Alarm Resume is enabled, allows you to select the day of the month for resumption of RTC alarm. (Set to 0 for every day.) Resume Time (hh:mm:ss) If RTC Alarm Resume is enabled, allows you to select what time the RTC alarm will resume. 8 Chapter 2 Computer Setup (F10) Utility
![](/manual_guide/products/compaq-dx7400-service-reference-guide-hp-compaq-dx7400-business-pc-f7a60f7/18.png)