Craftsman 305cc Owners Manual - Page 8

• To attachthe bag, placethe openingof the bag overthechutedeflectosr o it completelcyoversthe chuteopening.Depressthe plungeron the draw- string,andpull on the drawstringuntilthe bagis tightaroundthe chuteopeningR. eleaseplungetro lockitintopositionS. eefigure5. OPERATION KNOW YOUR CHIPPER-SHREDDER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHIPPER-SHREDDER. Compare the illustrations with your chipper-shredder to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Hopper Assembly Chipper Chute I Spark Plug, Wire and _ Boot Fuel Fill Oil Fill and Cap Dipstick Throttle Control FIGURE 6. Starter Handle Front of ChipperShredder MEETS ANSI SAFETYSTANDARDS Sears chipper-shredders conform to the safety standard B71.6-1982 of the American National Standards Institute. OPERATINGCONTROLS RELEASE BAR--Used to release the hopper when raising or lowering. See figure 10. PRIMER--Pumps additional fuel from the carburetor to the cylinder for use when starting a cold engine. See figure 14. STARTER HANDLE--Used to manually start the engine. See figure 6. THROTTLE CONTROL--Permits selection of fast or slow engine speed, and is used to stop the engine. See figure 6. BEFORE USING YOUR CHIPPER-SHREDDER, AGAIN REFER TO THE "SAFETY RULES" AS SHOWN ON PAGE 2 OF THIS MANUAL. ALWAYS BE CAREFUL. The operation of any chipper-shredder can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear the safety glasses provided with the chipper-shredder or eye shields before chipping or shredding, or while performing any adjustments or repairs. We recommend Wide Vision Safety Mask for over spectacles or standard glasses available at Sears Retail or Catalog Stores.