Craftsman 536.270320 Owners Manual - Page 12
>f - front left wheel
View all Craftsman 536.270320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
OPERATION HOW TO USE THE THRO'I-rLE CONTROL Use the throttle control to increase or decrease the speed of the engine The FAST position is marked with a detent. For normal operation and when using a grass bagger, move the throttle control to the FAST position For maximum charging of the battery and also for acooler running engine, operate the engine inthe FAST position 2 For transport and to tow pull behind attachments, move the throttle control to the SLOW position. 3 The engine governor isset at the factory for maximum performance Do not adjust the governor to increase the speed of the engine 2 Move the attachment clutch to the ENGAGE position to ro- tate the blade(s), 3 Move the attachment clutch to the DISENGAGE position to stop the blade(s) Before you leave the operator's position, make sure the blade(s) has stopped rotating 4,. Before you ride the unit across a sidewalk or a road, move the attachment clutch to the DISENGAGE position. _ WfroAmRNtIhNeG:blaAdlwe,aydseflkeecetporyoouprenhinagn,dsanadndthfeeetmaowwaeyr housing when the engine runs. >f HOW TO USE THE A'I'rACHMENT CLUTCH AttachmenCt lutch _._ Note: If the engine stops when you engage the blade(s), the seat switch is not activated. Make sure you sit in the middle of the seat. Also, make sure the wire is connected to the seat switch. The attachment clutch isnext to the steering wheel (Figure 8). Use the attachment clutch to engage the blade(s) !. Before you start the engine, make sure the attachment clutch is in the DISENGAGE position Disengage_Position /_ Figure 8 HOW TO USE THE SHIFT LEVER To change the forward speed or the direction of the unit, fotlowthe steps below CAUTION: Before you move the shift lever, completely push the clutchlbrake pedal forward to stop the unit. If the u nit is not stopped, the gearbox can be damaged, 1. Completely push the clutch/brake pedal forward to stop the unit Keep your foot on the pedal 2. Move the throttle control lever to the SLOW position 3 To move the shift lever to neutral (N) from a forward gear, pull the shift lever back and then move to the right (Figure 9) 4. To move the shift lever to a forward gear from neutral (N), pul! the shift lever to the left and then push the shift lever forward. 5. Slowly release the clutch/brake pedal. Do not keep your foot on the pedal. Shift Lever 6 Move the throttle control to the FAST position 7 To move the shift lever to reverse,stop the unit Move the shift lever back to reverse (R) NOTE: Belt noise can occur when the clutch is engaged. This noise is normal and does not affect the operation of the unit. - FUNCTION Trimming Bagging Grass Mulching Grass Normal Mowing Easy Mowing SHIFTLEVER THROTTLE 5 Speeds 1 FAST 1 or2 1 or2 2or3 3or4 i FAST II Illll m m SLOW THROTTLE Transpo_ SLOW - FAUST j C.OKEI lib F-99636 Figure 9 12 Pull Behind Attachments 2or3 i t THROTTLE Downloaded from www.Manualslib.com manuals search engine