Craftsman 536.270320 Owners Manual - Page 30
Replace, Mower, Drive
View all Craftsman 536.270320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
SERVICE AND ADJUSTMENT HOW TO REPLACE THE MOWER DRIVE BELT REMOVAL 1 Move the lift lever to the lowest position. 2 Slide the mower drive belt between the stack pulley and the belt guide. Remove the mower drive belt from the stack pulley 3. Pull the belt retainer away from the idler pulley and remove the mower drive belt (Figure 38). 4. Slide the mower drive belt between the mandrel pulley and the belt guides NOTE: Replace the mower drive belt with an original equipment belt from an authorized service center. 3 Pull the belt retainer away from the idler pulley. Put the mower drive belt around the idler pulley 4. Make sure the mower drive belt is inside all the belt guides Also make sure the mower drive belt is not twisted. 5 Slide the mower drive belt between the stack pulley and the belt guide. Install the mower drive belt around the the stack pulley 6 Before you mow, check the attachment clutch See the instructions on =How To Adjust The Attachment Clutch". INSTALLATION 1. Pull the belt guides away from the mandrel pulley Slide the belt between the belt guides and the mandrel pulley. 2, Make sure the =V" s=deof the mower drive belt is against the mandrel pulley (Figure 37). _ Pulley Figure37 Belt Retainer Idler Pulley F-99636 Mower Ddve Belt 30 Downloaded from www.Manualslib.com manuals search engine @ Figure 38