Cub Cadet TANK LZ 60 TANK L 60 KW Operator's Manual - Page 11

Assembly & Set-Up 3 Contents of Crate • One Zero-Turn Tractor • One ROPS Assembly • One Zero-Turn Tractor Operator's • One Engine Operator's Manual Manual • One Deck Wash Hose Coupler NOTE: This Operator's Manual covers several models. Tractor features may vary by model. Not all features in this manual are applicable to all tractor models and the tractor depicted may differ from yours. NOTE: All references in this manual to the left or right side and front or back of the tractor are from the operating position only. Exceptions, if any, will be specified. 3. The two hydrostatic transmissions are equipped with a bypass valve that will allow you to manually move the tractor short distances. 4. Engage the transmission bypass valves by engaging the parking brake. See Figure 3-2. The tractor will still not move freely until the parking brake is released. Tractor Preparation TOOLS NEEDED: Safety glasses, leather gloves, wire cutters. 1. Remove the upper crating material from the shipping pallet, and cut any bands or tie straps securing the tractor to the pallet. 2. Use the deck lift pedal to raise the deck to its highest position and secure in place with the clevis pin attached to the tractor. See Figure 3-1. Parking Brake Deck Lift Pedal Clevis Pin Figure 3-2 Figure 3-1 11